Tag: Wal-Mart

  • Taurus Judge: Not for Handgun Carry

    Taurus Judge: Not for Handgun Carry

     

    Taurus Judge for Self Defense
    Buy at Amazon

    Apparently the Taurus Judge is the most popular selling gun in the Taurus lineup, I didn’t know that when I started researching this article, but I believe it because I hear more students, coworkers and friends tell me how much they want a Judge for personal protection/prepping/zombie killing because it has the ability to shoot both centerfire ammunition as well as .410 shotshells.

    I also did not expect the level of disagreement when I posted my video on my opinions on using the Taurus Judge for self defense.

    I will admit that does give it some cool points, and I think it is a great concept, but I try to distinguish between true and perceived benefits and make any purchases based upon a cost benefit analysis rather than getting wrapped up with and enamored by features.

    People Don’t Buy Features, They Buy Promises

    The ability to fire 45LC ammunition in addition to .410 shotshells is a feature.  It is perceived benefit is increased flexibility.  However when compared with the size and weight of the gun, (the snub nose 2.5 inch chambered Judge is larger than my Glock 19), the small amount of ammunition available (5 shots), and the inaccuracy (more on that later), I just don’t see it as a justified self-defense purchase.

    Now, don’t think I am bashing the Judge, I think it is a cool gun, and was a blast to shoot. I also do not think there is a better gun for backwoods fishermen to use as a tackle box gun for snakes. – It would also be great in a shoulder holster for farmers on tractors out clearing brush. A .410 shotshell is much more effective against rattlesnakes that a .38 or .45 revolver shooting a shotshell cartridge.

    You would think that a pistol firing shotshells would be regulated under the National Firearms Act as a Short Barreled Shotgun, but since the pistol has rifling in the barrel (shallow enough to allow it to be used as a shotgun) it is legally considered not to be a shotgun (except in Commiefornia where it is banned). While this great legally, what it does is make a barrel that does not live up to its potential as an accurate centerfire handgun, nor as an accurate shotgun. The rifling gives less stability to single projectiles, yet still causes a more rapid dispersion of the shot pellets when used as a .410.

    Don’t buy a gun that promises flexibility, but only shoots well with special ammunition.

    Shooting the Gun

    I was able to shoot one of these pistols when a student at an NRA Pistol Instructor Course brought one in. The fit and finish was nice, and it felt good in my hand. Admittedly I was not able to fire a lot of rounds as I had to stick with what I had on hand, but as you can see in the video below I feel that when shooting buckshot (which is the round of choice for almost everyone that wants one ) the rifling causes the shot to “fling” out in a wide pattern – at almost contact distance I had about a 6 inch pattern – at 7 yards only one pellet hit anything nearing a vital shot on a human sized target.

    If you have a 2.5 inch chambered Judge shooting OO buck you only get 4 .32 led balls – times that by the 4 chambers and you only have 20 potential projectiles – and the vast majority of them won’t hit a vital area of an attacker, and those that do are underpowered and designed to function best when paired with several other their brother’s hitting nearby at the same time. Speed loaders are rare and I only know one company that sells them.

    For a comparable cost and size I can get another Glock 19 that shoots 16 larger, more accurate and more effective bullets that are easier and cheaper to purchase.

    It seems to me that if you are buying a gun that shoots multiple calibers to prepare for a time when ammunition is hard to get, it is counterproductive to get two of the more rare calibers – when is the last time you have seen .45LC or OO/OOO .410 buckshot at the Wal-Mart?

    If You Want One Buy One

    I have more in common with someone that chooses a gun different self defense gun than I do with someone that chooses not to have a self defense gun at all.  Please don’t take this article personal. I am not mad at people that love the .410 Judge.  My reason for writing this was not to bash, but to inform.

    I just want to share my knowledge on the matter and try to influence someone that wants a self-defense gun to get a gun that is more effective.

  • How to Replace the Recoil Spring in a Walther P22

    How to Replace the Recoil Spring in a Walther P22

     

    Walther P22 Recoil Spring Replacement
    Buy at Amazon

    This post is about why I had to do some work on my Walther P22 Recoil Spring.  It also shows how to replace the recoil spring in a Walther P22

    I am a huge believer in repetition for any physical skill. If you want to be good at something you have to put in the time practicing perfectly. I have heard that to be a master of something you need to spend at least 10,000 hours practicing the skill. Dry firing can be a big part of that time block, but you will HAVE to get out to the range.

    I haven’t won the lottery, or invented the next widget so spending 10,000 hours of range time is cost prohibitive shooting centerfire ammunition, but I since still have to practice I decided to try a .22 rimfire.

    After hearing a lot of good things about the Walther I bought myself a P22. I was told that it needed a long break in period using premium ammunition and repeated cleanings in order for it to function properly. However, even after firing 500 premium rounds through the gun, I was still having malfunctions with the gun.

    A weak grip is notorious for causing malfunctions, so I spent time looking into that.

    Not the problem.

    Early model P22s had a magazine problem.  The newer (marked with a “b”) magazines have a 1inch slit cut into them for the rimmed cases to stack.  This is also not the problem

    Several internet forums state that bulk green box federal rounds are not powerful enough to cycle the gun…

    BINGO

    In my search for cheap shooting those 550 round Wal-Mart boxes of ammo is pretty much all I shoot in my .22lr caliber firearms.

    Now, that doesn’t help me much – higher velocity .22 ammo is getting expensive – I want to shoot as cheaply as possible so I kept searching for a solution. A gunsmith friend of mine told me that they changed out the recoil spring in later designs of the Walther P22. The new recoil spring is lighter.

    I had also read on the interwebz that “cutting a couple turns off the spring” helped – Now I am not willing to butcher my gun by cutting springs – but I am willing to try a new factory spring. I called Walther customer service, explained my problem, and asked if I could purchase a spring. They were very helpful and sent me a new spring at no charge.

    The one I received was a bit longer than the original, but it had a lot more “give”.
    I replaced the Walther P22 Recoil Spring and as the video shows I was able to rapidly fire the firearm without any malfunctions. I don’t have enough rounds through the gun with the new spring to say the problem is fixed, but I am quite pleased with Walther working with me fix the problem.

    As a value added tip for following along this far I am going to tell you an easier way to reassembly the slide back on the frame without using the little tool they send you:

    How to Replace the Recoil Spring in a Walther P22

    • Put the recoil guide rod in your palm(non-dominant hand), and insert the spring over it.
    • Compress the spring, once compressed use your thumb and forefinger to grasp the recoil spring and rod. Several inches of rod should extend past your fingertips.
    • With your dominant hand pick up the slide and push the guide rod through the hole in the slide.
    • Grasp the end of the rod with your dominant hand. Once you have a firm grasp (otherwise you will shoot the rod across the room), let go with your non-dominant hand.
    • The Compressed spring should be inside the slide, with your hand holding on to the majority of the guide rod sticking outside the muzzle end of the slide.
    • Guide the slide onto the frame, with the barrel inserted into the slide and slightly extended outside of the slide.
    • Slowly, and carefully release tension on the guide rod so that it retreats back into the slide. Once the guide rod is touching the frame wiggle it until it slides into the detent inside the frame.
    • Let go of the guide rod
    • Rack the slide
    • Press the slide down over the ears in the frame
    • Ride the slide forward
    • Push the locking bar back up
    • Function check the pistol

    It takes some practice to do it this way, but it is a much simpler way of doing things.

    Understanding the USE of Handguns for Self-Defense

    The Gun Digest Book of .22 Rimfire: Rifles ·Pistols ·Ammunition