Coloring AR-15 Receiver Markings

 

Coloring AR-15 Receiver Markings
Buy at Amazon

This post is a little mall ninja, and coloring ar-15 reciever markings is not the most loved idea.

However, this is my AR, and I really like the white and red filled selector markings on HK firearms and wanted to replicate it on my firearm.

There are several ways of doing it, and I used a red lumber crayon on the AR in the video
Basically I just rubbed the crayon over the inscription and then wiped off the excess.  Just like ivory scrimshaw, the colorant filled the deeper cuts and was able to be wiped clean of the body.

You can dab enamel paint or fingernail polish into the engraving for a more durable color, but it is harder to remove it from the side of the gun. If you use a rag with too much thinner it will drip in and mix with the paint you want to keep. Not enough and it can smear on the body of your gun.

If you use crayon, be aware heat can make it run

If you use nail polish and decide to remove it, a tooth brush and nail polish remover does a good job.

I like how this looks, but you need to be careful what you use, and ensure its what you really want.  Some people like the look that comes from coloring AR-15 receiver markings, but many do not.

How to Make Homemade Baking Powder

How to Make Homemade Baking Powder

How to Make Homemade Baking Powder
Buy at Amazon

Here is a recipe for homemade baking powder, which is an essential ingredient in many baking recipes.

I add it because it can be cheaper to make it in bulk on your own (depending on if you can get cheap cream of tartar – a byproduct of wine making), and because many commercial baking powder products contain aluminum sulfate.

Homemade baking powder also keeps aluminum out of your food.

Ingredients:

  • 1 teaspoon baking soda
  • 2 teaspoons cream of tartar
  • 1 teaspoon corn starch (optional – used to reduce caking, which what the sulfate does)

Procedure:

  • Mix the baking soda and cream of tartar together until well combined.
  • Use immediately

If you want to store it, add a teaspoon of corn starch to the mixture, and stir.
This will absorb any moisture from the air, store in an air-tight container.

A lot of people may wonder why go through all the trouble to make something you can easily go to the store and buy and it is hard to explain to them.

Partly the reason is because most of the time homemade is more healthy, but that’s not the real reason.

Sometimes, homemade is cheaper – but that is not it either.

Homemade may be the only thing available in a disaster, and that is a great reason to know how to do it.

But its the same reason some people climb mountains – because it is there, and because I can.

How to Make Dehydrated Toothpaste Dots

How to Make Dehydrated Toothpaste Dots

 

How to Make Dehydrated Toothpaste Dots
Buy at Amazon

Here is a quick tip for backpacking or camping where space and weight is a premium – make Dehydrated Toothpaste Dots.

To make a chewable single use dry toothpaste “mint” lay out foil sheet or parchment and make rows of toothpaste spots.

Allow to dry for 2-4 days.

Sprinkle baking soda on top to keep from sticking.

Repackage in small bags.

I stopped making these Dehydrated Toothpaste Dots when the boy began thinking they were candy.  But they are good for trips and traveling – once you have a can of shaving cream explode, or some shampoo leak into your luggage you begin to think about new ways to pack your stuff.

There really isn’t much more to say about this project other than you should be careful where you let them dry at – you don’t want to leave them in your bathroom because of the bacteria, and you don’t want the to sit out too long because they get really hard and nasty.

If this is not something you want to try, but you still have the issue of packing something light and easy for tooth brushing in the outdoors, you may want to just get a small container of baking soda – but I will warn you – this tastes better.

To use

Pop one Dehydrated Toothpaste Dots in your mouth, chew, then add a small amount of water in your mouth and start brushing.

Recipe Waffle Iron Chicken

52 Unique Techniques for Stocking Food for Prepper
Buy at Amazon

While messing around on youtube I found the neatest youtube channel from a guy named meatmangary.

He had a couple of cool videos that I took and modified to try something new.

Basically the Meat Man cooked a cheeseburger using his waffle iron – since I had played with my waffle iron to make hashbrowns. I wanted to try this, however, since Gary had already done the cheeseburger I wanted to try something new.

What came to my mind was Chicken and Waffles…

This is my attempt at Waffle Iron Chicken

Would cooking ground chicken on the waffle iron and eating with syrup and waffle taste as good as it sounds.

Simple answer – yes…

What is important is to well oil the waffle iron, be patient and let it cook through before opening, and to make sure you don’t over-cook the chicken.

My wife liked this recipe and told me it’s something to make again – besides that – it is easy and doesn’t need a lot of cleanup.

This is an awesome recipe.  I loved it, it was simple, and it was cool.  Of course what I think cool is not what most would think was cool.

Chicken and Waffles…..